Email Us
KALMATRON

• Concrete Admixtures • Protective Coatings  • Concrete Regenerative Spays • Concrete Mix Designs •


Inventions of the 21st Century ©2022 Two Gears Give the Torque !

 CONCRETE ADMIXTURE provides stable features of High Performance Concrete  - 8 ½ lb/cu. yd or 5 kg/m3 for conventional concrete mixes  - 12 lb/cu. yd or 7.5 kg/m3 for precast concrete mixes  - 17 lb/cu. yd or 10 kg/m3 for plaster, gunite and shotcrete mixes CEMENT CLASS UPGRADING ADMIXTURE for activation of unhydrated cement grains. Increases SS up to 3 times. Ordinary Cement with KC is converted to a micro cement.

K100® is a liquid version of KALMATRON® KF-A applicable by 2 Liters/m3 or 0.41 GL/CY. PROTECTIVE WATERPROOF COATING for concrete and masonry structures in damp environments. Penetrates up to 6” or 150 mm into the protected material and provides liquid and vapor impermeability. 

CONCRETE DENSITY UPGRADING ADMIXTURE provides highest density of the cement rock of fine grouts for concrete repair by coating with thicknesses from 8 mm to 35 mm or from 1/3” to 1 ¼”.

RAPID SET PLUG + WELD patching material, stops pressured leaks instantly. Very effective for internal patching of micro-cracks and quick stabilization of anchors.

DCM/EMS, Dust control material and earth material sealant to stabilize any type of soil. KF-D allows injection through the whole depth of crumbled soil. ADDITIVE FOR CONCRETE MIX containing up to 50% of incinerated industrial waste such as fly ash, slag ash, volcano sand or crumbled materials. 

LIQUID VERSION OF KALMATRON®  KF-ASH is applicable by the volumetric ratios as 1 GL/CY (5 OZ/CF) or 5 Liter/m3. ADMIXTURE, COATING & HARDENER for concrete and plaster mixes. VERSATILE PROTECTIVE COAT provides impermeability and resistance to corrosion of concrete and masonry structures. High compressive and abrasion resistance. Applied by spray/brush 0.5 mm to 2 mm layer thickness.

RADIATION SHIELDING COATING & ADMIX for X-ray attenuation and conservation of concrete, masonry and Earth made structures.

SET TIME ACCELERATOR: 3 min, 5 min, and 10 minute setting time:20 Kg of KF-Jet 3 per 1 m. ton of cement; 15 Kg of KF-Jet 5 per 1 m. ton of cement;10 Kg of KF-Jet 10 per 1 m. ton of cement. CONCRETE REHABILITATION SPRAY for renovation of concrete rheology. Heals shrinkage cracks, restores of strength and impermeability. 0.35 kg of KF-G dissolved with 1 Liter of water per 1 m2 of surface.

ANTI DECAY SHIELDING MATERIAL for coating timber, masonry and concrete structures to prevent microbiological decay. Applicable by brush, spray or trowel. Coverage: 2.0 kg/m2.

ADMIXTURE TO SALT-CONTAMINATED CONCRETE MIXES containing unwashed sea sand and gravel: 13Kg/m3 or 22 lb/cu. yd

THERMAL RESISTANT COATING & ADMIX: inorganic, non-asbestos compound for insulation and protection of building structures and equipment from heat, noise and primordial ionic environments. 

FINE PLASTER MIX DESIGN: impermeable to any industrial liquids, gases and resistant to ionic environments.

ADMIXTURE TO ROAD PATCHING CONCRETE designed for fast patching of rocky and concrete roads and floors. Add KF-K to any conventional concrete mix to increase viscosity and adhesion. Ready for traffic in 1 ½ to 4 hours.

GROUT MIX DESIGN for relining aged and damaged concrete surfaces. Provides abrasion resistance, 100% waterproof starting at a layer thickness of 8 mm.

Kalmatron powder products are packaged in water repellent, plastic bags of 50 lb. each. Liquid products are supplied in standard 5 gallon pails and 264 gallon totes/IBC's.

Research and Production Division  CONTACT US   WEBSITES 

276 Michelle Court,  South San Francisco, 

CA 94080-6201, USA P:  ( 415) 385-3290 F: (650) 872-2555  ​kalmatronworld@aol.com

 SPECIAL EDITIONS 

Click the button to open page 

 STRUCTURAL ELEMENTS 

KALMATRON GALLERY

We ship within the USA and world-wide from our South San Francisco plant - please  contact us  for more information and to request a quote.

Design a Mobile Site
View Site in Mobile | Classic
Share by: